Candle Care

How to use your Crystalline Candle©

Once you light the candle, you then remove the crystals from the wax and place them beside the jar. Keep in mind that the soy wax has liquid crystal throughout it, and the frequency of the crystal will still vibrate throughout the candle. You can use the crystalline candle as a tool to immerse yourself in the high frequency the candle is emitting – whether lit or not – to work its magic. Alternatively, you can use it as a ritual because it has been created with the intention to allow for a positive shift and change in your reality.  I created the 40-Day Candle Therapy© to help you take your power back and create the life you desire.
No. 1. Strip me bare: Remove the crystals before lighting the candle. Otherwise, it may cause the wax to over-flow.
No. 2. Trim your wick: Always trim your wick before lighting, to around a 5mm length for optimum burn.
No. 3. Safety first: The most important step; never leave a lit candle unattended.
No 4. Let it melt: Always allow the melted wax to reach the edge of the jar, especially on the first burn to avoid tunneling.
No. 4. Snuff it out: Do not blow out your candles. Use a candle snuffer. The elements of air and fire don’t mix, especially when you are using your candle with an intention. You don’t want to blow away the very thing that you are trying to manifest.
No. 5. Make the world a better place: Clean up the jar when there is 1-1.5cm of wax remaining & it will be yours to keep. If you wish to part-ways with the jar, please recycle it.
Follow us on for more info.


No. 1. When burning your candle for the first time, allow the wax to melt until it reaches the edges of your vessel before extinguishing. This will create a candle memory and a clean and even burn in the future.

No. 2. Never leave your candle burning longer than 3 hours at a time. Once the wax reaches halfway down your vessel, carefully monitor the burn time and extinguish the flame after 1 hour.

No. 3. After use when the wax has cooled and set, trim your wick to 5mm again before relighting to avoid wick 'mushrooming'.

No. 4. Always trim your wick to 5mm before lighting your candle to ensure you receive the maximum burn time.

No. 5. Discontinue use when the wax reaches 10mm-15mm from the bottom of your vessel.

No. 5. When you have finished burning your candle, simply wash out any leftover wax with hot water and detergent.